The WINMAU BLADE Champion Choice Dual Core dart board features a sharpened rim on both the segments and the bull instead of the traditional metal wire solution.
With narrower double and triple sectors for the more challenging player
Ideal for tournament preparation.
- Official tournament size!
No hold-downs on the bull, doubles and triple sectors for the least amount of rebound arrows. The wire mesh is recessed into the board material, it cannot move like it can with simpler staple, hold-down boards.
Dual core means the board is made up of 2 sections of different design. The top sisal hemp part, into which we throw a large sisal "scone" is
pressed, it does not have the cracks seen in traditional "scone" pressed boards, from which arrows might be dislodged. This top layer is a little softer, and underneath is the traditional "scone" pressed part, which is pressed harder so that players who shoot heavy arrows with a heavy arrow will not have their arrows touch the back wood plate when shooting.
Differences between BLADE 5 champion choice dual core and BLADE 4 champion choice dual core:
- The wiring is made from higher quality cold rolled steel. This increases the durability of the wiring
and makes it stronger and reduces the number of bouncing arrows, increasing the effectiveness.
- The wires separating the single sectors are 10% thinner, the wires separating the double and triple sectors
are 20% thinner.
- The wire sharpening has been sharpened to an angle of 60 degrees instead of 90 degrees, - The bull is made with new carbon diffused technology, even stronger and less arrow rebound.
Instructions for use, failure to follow may void warranty!
-Do not leave in direct sunlight and hang over heater! ( it will dry out)
-The board must also be protected from moisture, otherwise the hemp fibers will swell and bump up.
-Only use the board with properly maintained tips, dull or hooked tips
can damage the dart board! The arrows should be pulled out of the board one at a time and straight, not all at once,
tightened and stretched, loosening the sisal material of the board.
To ensure a uniform load on the board, (if for example the 20 sector has received a lot of shots) it should be rotated during the
course of use.(With regular use, every 2-3 weeks.) You can turn the
board either to the right or to the left by one sector out of the 10 black sectors, the main thing is to make sure that the top sector is black and that you draw the number 20 from the number ring above it. This will make the board
longer usable, if this sector is also very busy, move it one sector over again. If the board is not
rotated all sectors are hardly used, but 1 or a few sectors will be thrown away.
Dart arrows are not included, arrows can be bought separately in different weights, materials and qualities!
